Novel hepatitis C virus protease inhibitors: thiazolidine derivatives

This study evaluated the inhibitory effects of thiazolidine derivatives on hepatitis C virus (HCV) protease and other human serine proteases. The inhibition efficacy was tested with a reversed-phase high-performance liquid chromatography (HPLC) assay system using a NS3-NS4A fusion protein as the HCV protease and a synthetic peptide substrate that mimics the NS5A-5B junction. Nine thiazolidine derivatives showed more than 50% inhibition at 50 microg/ml. The most potent derivative was RD4-6250, with 50% inhibition at a concentration of 2.3 microg/ml; this concentration was lower than those of other protease inhibitors reported previously. The most selective derivative was RD4-6205, with 50% inhibition at a concentration of 6.4 microg/ml, a lower concentration than those on other serine proteases (chymotrypsin, trypsin, plasmin, and elastase). These results suggest that the RD4-6205 skeleton is an important structure for inhibitory activity on the HCV protease NS3-NS4A.     

Successful surgical repair for a patient with atrial septal defect and severe pulmonary hypertension--its surgical indication and prostaglandin E1 use for postoperative pulmonary hypertensive crisis

A 45-year-old woman with atrial septal defect and pulmonary hypertension was admitted for surgical repair. Cardiac catheterization data revealed pulmonary to systemic flow ratio (Qp/Qs) of 1.81, pulmonary artery pressure (PAP) of 82/30 mmHg and pulmonary vascular resistance (PVR) of 10.8 unit. Open lung biopsy was added to evaluate pulmonary vascular obstructive disease (PVOD) which was shown Heath-Edwards grade 3 PVOD. Following closure of the defect, PAP (systolic) exceeded momentarily systemic level after cardiopulmonary bypass. Prostaglandin E1 drip was remarkably effective to bring down PAP during early postoperative period. Although PAP has not been shown significant decrease on catheterization of one year after surgery, great symptomatic improvement has been achieved.     

Exchangeability of actin in cardiac myocytes and fibroblasts as determined by fluorescence photobleaching recovery

OBJECTIVE: To assess whether hypertension is a risk factor for hysterectomy performed for benign diseases. METHODS: Self-report questionnaires were collected from 77% of 2301 Danish women aged 30, 40, 50, or 60 years selected at random in 1982 for a prevalence study. Information about cardiovascular diseases, hypertension, use of medicine, weight and dieting history, life-styles, psychologic factors, gynecologic history (including history of hysterectomy), and social background were recorded. Weight, height, and blood pressure were measured. In an incidence study, the cohort was followed during 1982-1990 via central registers to assess the incidence of hysterectomy. Logistic and Cox regressions were used to analyze data. RESULTS: In the prevalence study, history of hypertension partly explained the relation between hysterectomy and cardiovascular diseases. In the incidence study, history of hypertension and use of diuretics were significant risk factors for hysterectomy. After confounder control, use of diuretics was explained by weight-related variables, and hypertension was a risk factor for hysterectomy in educated women (adjusted relative risk [RR] 2.88, 95% confidence interval [CI] 1.07, 7.76) and in women with weight fluctuations (adjusted RR 3.31, 95% CI 1.35, 8.14). Weight cycling and lack of education remained significant risk factors for hysterectomy in women with and without hypertension, respectively. CONCLUSION: History of hypertension, weight cycling, and lack of education are closely related risk factors for premenopausal hysterectomy. These three risk factors contribute to women undergoing hysterectomy having an increased risk for cardiovascular diseases. We proposed that hypertension might be a plausible biological cause of menorrhagia and an indication for hysterectomy.     

Enhancement by ganglioside GT1b of annexin I phosphorylation in bovine mammary gland in the presence of phosphatidylserine and Ca2+

Ganglioside GT1b and, to a lesser extent, GD3, enhanced phosphorylation of a 36 kDa protein (the substrate of protein kinase C) in the particulate fraction from bovine mammary gland. Sialic acids, asialogangliosides, and GM3 were without effect, and GD1a conversely inhibited phosphorylation of the 36 kDa protein. The enhanced phosphorylation by GT1b required the simultaneous presence of phosphatidylserine (PS) and Ca²⁺. The 36 kDa protein reacted with anti-annexin I in Western blot analysis. Addition of purified annexin I to the reaction mixture containing the particulate fraction increased the extent of phosphorylated 36 kDa protein, and the phosphorylation was further enhanced by GT1b. The enhanced phosphorylation of annexin I by GT1b was also dependent on PS and Ca²⁺. When annexin I was phosphorylated by purified protein kinase C, GT1b inhibited the annexin I phosphorylation. Addition of epidermal growth factor or insulin to the particulate fraction had little effect on the enhancement. These results suggest that an enzyme or enzymes other than protein kinase C, epidermal growth factor receptor kinase, or insulin receptor kinase is responsible for the GT1b- and GD3-enhanced phosphorylation of annexin I in the presence of PS and Ca²⁺.     

Antiarrhythmic effect related to the plasma concentration of pentisomide in vivo and the antiarrhythmic-concentration relationship in vitro

Pentisomide, 2-(2-diisopropylaminoethyl)-4-methyl-2-(pyridyl)- pentanamide, is a novel antiarrhythmic agent structurally related to disopyramide. Using a glass bead arrhythmic model, the authors studied the antiarrhythmic effect of pentisomide in dogs by monitoring the plasma concentrations. When pentisomide was infused at 1 mg/kg/min for 20 min, the ventricular tachycardia was significantly reduced at 5 min after starting the infusion; the arrhythmias were reduced to less than 5% at the end of the 20 min infusion. The plasma-free concentration of pentisomide was about 3 micrograms/ml at 5 min; it increased to about 10 micrograms/ml at the end of 20 min infusion. With 0.3 mg/kg/min infusion, the arrhythmias were reduced to about 60% but were not significant at 20 min of infusion. The plasma-free concentration of pentisomide did not reach 3 micrograms/ml until 20 min of infusion. The 3 micrograms/ml plasma-free concentration for pentisomide seems to be a critical concentration in inducing a significant antiarrhythmic effect. Pentisomide dose-dependently inhibited ischaemia-reperfusion arrhythmia at doses of 30 microM and higher concentrations in vitro. In conclusion, pentisomide inhibits arrhythmias dependent with the plasma concentration or with the concentration of the external solution. The critical plasma-free concentration for inhibition of arrhythmias was 3 micrograms/ml (not equal to 10 microM) and the in vitro effect also had a similar concentration. Therefore, the in vivo and in vitro antiarrhythmic concentrations were well correlated.     

Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

Selective oxidation of Fe-30Ni alloy in a low-temperature range (433–473 K)

Fe-30Ni alloy specimens were oxidized for 10–240 min at 433–473 K in pure oxygen at a pressure of 1.33×10⁴ Pa. The thickness of oxide films was measured by a multiple-angle-of-incidence ellipsometer. The kinetics of film growth were found to obey a parabolic rate law. The depth-profiling of oxidized surfaces, performed with simultaneous use of Auger electron spectroscopy (AES) and argon-ion sputter-etching technique, reveals that iron component is selectively oxidized and an iron-depeletion zone is formed in the underlying alloy. The thickness of the iron depletion zone increases with increasing oxidation time or oxidation temperature. During surface oxidation of the alloy, the transport rate of iron component in the film is almost equal to the interdiffusion rate in the underlying alloy, indicating the establishment of a steady state. The values of the interdiffusion coefficient, , of the underlying alloy estimated from the depth-composition profiles are more than 10 orders of magnitude as large as the values extrapolated from the lattice diffusion data of the corresponding alloy obtained at high temperature. The enormously large values of may be explained in terms of the vacancy (monovacancy or divacancy)-enhanced lattice diffusion mechanism.     

ARCOR,a new photolithography technique with antireflective coating on resist

The multiple interference effect is one of the major causes of the fluctuation in critical dimension control (CD) and in mark detection for alignment. Suppressing this effect is critical for future photolithography. We propose a new photolithography technique called anti reflective coating on resist (ARCOR), which improves linewidth accuracy and overlay accuracy by suppressing multiple interference. ARCOR consists of relatively simple processes: A clear antireflective film is spun onto the resist prior to the mark detecting for alignment and exposure. The film is subsequently removed and the resist developed in the conventional way. ARCOR differs from ARC, which suppresses the reflection at the resist/substrate interface. ARCOR suppresses the reflection at the air/resist interface. ARCOR allows mark detection and exposure without light intensity-loss and multiple interference. The experiments mainly examine polysiloxane and perfluoroalkylpolyether as ARCOR materials. It is shown that linewidth accuracy can be improved from 0.3 to 0.03 μm. The signal-to-noise ratio of the alignment signal is drastically improved, and the overlay error is about half that of the conventional method. ARCOR is also effective for directly measuring the reflectivity at the resist/substrate interface, which is a key parameter of the multiple interference effect and the halation. Using ARCOR and a thin resist film, the measured ratio of reflected light to incident light indicates the reflectivity at the resist/substrate interface. Because, the probe light does not reflect off the resist surface and the intensity-loss at the resist surface is suppressed. With perfluoroalkylpolyether film, the measurement error is ～ 1.5%.     

Heavy oil sorption and recovery by using carbon fiber felts

On fibrous carbon materials, including activated carbon fibers, sorption capacity for heavy oils, less viscous A-grade and more viscous C-grade, was determined. Sorption capacity depended strongly on their bulk density; the correlation was the same as that found previously on exfoliated graphite and carbonized fir fibers. On carbon fiber felts, excellent recycling performance was observed, though sorption capacity was not so high as on exfoliated graphite and carbonized fir fibers. By filtration under suction, about 90% of sorbed A-grade heavy oil could be recovered and no decrease in sorption capacity was detected even after eight cycles. By washing with solvents, n-hexane for A- and C-grade oils and A-grade oil for C-grade oil, almost 100% recovery with no marked reduction in sorption capacity was found for each cycle. For the felts of PAN-based carbon fibers, rather severe operations for oil recovery, centrifugation and squeezing with twisting, could be applied without pronounced decreases in sorption capacity and recovery ratio.